The octane rating is a measure of the resistance of gasoline and other fuels to detonation (engine knocking) in spark-ignition internal combustion engines. The higher the octane rating, the slower the fuel burns. High-performance engines typically have higher compression ratios (and hence longer piston strokes) which requires higher octane (slow burning) fuel to allow the piston power stroke to complete before the fuel is completely burned. If the fuel burns faster than the downward movement of the piston allows, then the pre-detonating fuel results in a loud "knocking" sound and vibration. A lower-performance engine will not generally perform better with high-octane fuel, since the lower compression ratio is fixed by the engine design.






Gasoline

From Wikipedia, the free encyclopedia

Gasoline (American) or petrol (Commonwealth) is a petroleum-derived liquid mixture, primarily used as fuel in internal combustion engines. It is also used as a solvent, mainly known for its ability to dilute paints. It consists mostly of aliphatic hydrocarbons obtained by the fractional distillation of petroleum, enhanced with iso-octane or the aromatic hydrocarbons toluene and benzene to increase its octane rating. Small quantities of various additives are common, for purposes such as tuning engine performance or reducing harmful exhaust emissions. Some mixtures also contain significant quantities of ethanol as a partial alternative fuel. Most current or former Commonwealth countries use the term petrol, abbreviated from petroleum spirit. In North America, the word gasoline is the common term, where it is often shortened in colloquial usage to simply gas. It is not a genuinely gaseous fuel (unlike, for example, liquefied petroleum gas, which is stored under pressure as a liquid, but returned to a gaseous state before combustion). The term petrogasoline is also used. The Jamaican spelling is gasolene.

Diesel fuel (pronounced /ˈdiːzəl/) in general is any fuel used in diesel engines. The most common is a specific fractional distillate of petroleum fuel oil, but alternatives that are not derived from petroleum, such as biodiesel, biomass to liquid (BTL) or gas to liquid (GTL) diesel, are increasingly being developed and adopted. To distinguish these types, petroleum-derived diesel is increasingly called petrodiesel. Ultra-low sulfur diesel (ULSD) is a standard for defining diesel fuel with substantially lowered sulfur contents. As of 2007, almost every diesel fuel available in America and Europe is the ULSD type. In the UK, diesel is commonly abbreviated DERV, standing for Diesel Engined Road Vehicle (fuel).

First generation biofuels

'First-generation biofuels' are biofuels made from sugar, starch, vegetable oil, or animal fats using conventional technology.[2] The basic feedstocks for the production of first generation biofuels are often seeds or grains such as wheat, which yields starch that is fermented into bioethanol, or sunflower seeds, which are pressed to yield vegetable oil that can be used in biodiesel. These feedstocks could instead enter the animal or human food chain, and as the global population has risen their use in producing biofuels has been criticised for diverting food away from the human food chain, leading to food shortages and price rises. The most common first generation biofuels are listed below. [edit] Bioalcohols Biologically produced alcohols, most commonly ethanol, and less commonly propanol and butanol, are produced by the action of microorganisms and enzymes through the fermentation of sugars or starches (easiest), or cellulose (which is more difficult). Biobutanol (also called biogasoline) is often claimed to provide a direct replacement for gasoline, because it can be used directly in a gasoline engine (in a similar way to biodiesel in diesel engines). Ethanol fuel is the most common biofuel worldwide, particularly in Brazil. Alcohol fuels are produced by fermentation of sugars derived from wheat, corn, sugar beets, sugar cane, molasses and any sugar or starch that alcoholic beverages can be made from (like potato and fruit waste, etc.). The ethanol production methods used are enzyme digestion (to release sugars from stored starches), fermentation of the sugars, distillation and drying. The distillation process requires significant energy input for heat (often unsustainable natural gas fossil fuel, but cellulosic biomass such as bagasse, the waste left after sugar cane is pressed to extract its juice, can also be used more sustainably).
Ethanol can be used in petrol engines as a replacement for gasoline; it can be mixed with gasoline to any percentage. Most existing car petrol engines can run on blends of up to 15% bioethanol with petroleum/gasoline. Ethanol has a smaller energy density than gasoline, which means it takes more fuel (volume and mass) to produce the same amount of work. An advantage of ethanol (CH3CH2OH) is that is has a higher octane rating than ethanol-free gasoline available at roadside gas stations which allows an increase of an engine's compression ratio for increased thermal efficiency. In high altitude (thin air) locations, some states mandate a mix of gasoline and ethanol as a winter oxidizer to reduce atmospheric pollution emissions.
Ethanol is also used to fuel bio ethanol fireplaces. As they do not require a chimney and are "flueless", bio ethanol fires [3] are extremely useful for new build homes and apartments without a flue. The downside to these fireplaces, is that the heat output is slightly less than electric and gas fires.
In the current alcohol-from-corn production model in the United States, considering the total energy consumed by farm equipment, cultivation, planting, fertilizers, pesticides, herbicides, and fungicides made from petroleum, irrigation systems, harvesting, transport of feedstock to processing plants, fermentation, distillation, drying, transport to fuel terminals and retail pumps, and lower ethanol fuel energy content, the net energy content value added and delivered to consumers is very small. And, the net benefit (all things considered) does little to reduce un-sustainable imported oil and fossil fuels required to produce the ethanol.[4] Although ethanol-from-corn and other food stocks has implications both in terms of world food prices and limited, yet positive energy yield (in terms of energy delivered to customer/fossil fuels used), the technology has lead to the development of cellulosic ethanol. According to a joint research agenda conducted through the U.S. Department of Energy,[5] the fossil energy ratios (FER) for cellulosic ethanol, corn ethanol, and gasoline are 10.3, 1.36, and 0.81, respectively.[6][7][8]
Many car manufacturers are now producing flexible-fuel vehicles (FFV's), which can safely run on any combination of bioethanol and petrol, up to 100% bioethanol. They dynamically sense exhaust oxygen content, and adjust the engine's computer systems, spark, and fuel injection accordingly. This adds initial cost and ongoing increased vehicle maintenance.[citation needed] As with all vehicles, efficiency falls and pollution emissions increase when FFV system maintenance is needed (regardless of the fuel mix being used), but is not performed. FFV internal combustion engines are becoming increasingly complex, as are multiple-propulsion-system FFV hybrid vehicles, which impacts cost, maintenance, reliability, and useful lifetime longevity.[citation needed] Even dry ethanol has roughly one-third lower energy content per unit of volume compared to gasoline, so larger / heavier fuel tanks are required to travel the same distance, or more fuel stops are required. With large current un-sustainable, non-scalable subsidies, ethanol fuel still costs much more per distance traveled than current high gasoline prices in the United States.[9]
Methanol is currently produced from natural gas, a non-renewable fossil fuel. It can also be produced from biomass as biomethanol. The methanol economy is an interesting alternative to the hydrogen economy, compared to today's hydrogen produced from natural gas, but not hydrogen production directly from water and state-of-the-art clean solar thermal energy processes.[10]
Butanol is formed by ABE fermentation (acetone, butanol, ethanol) and experimental modifications of the process show potentially high net energy gains with butanol as the only liquid product. Butanol will produce more energy and allegedly can be burned "straight" in existing gasoline engines (without modification to the engine or car),[11] and is less corrosive and less water soluble than ethanol, and could be distributed via existing infrastructures. DuPont and BP are working together to help develop Butanol. E. coli have also been successfully engineered to produce Butanol by hijacking their amino acid metabolism[12]. [edit] Biodiesel Biodiesel is the most common biofuel in Europe. It is produced from oils or fats using transesterification and is a liquid similar in composition to fossil/mineral diesel. Its chemical name is fatty acid methyl (or ethyl) ester (FAME). Oils are mixed with sodium hydroxide and methanol (or ethanol) and the chemical reaction produces biodiesel (FAME) and glycerol. One part glycerol is produced for every 10 parts biodiesel. Feedstocks for biodiesel include animal fats, vegetable oils, soy, rapeseed, jatropha, mahua, mustard, flax, sunflower, palm oil, hemp, field pennycress, pongamia pinnata and algae. Pure biodiesel (B100) is by far the lowest emission diesel fuel. Although liquefied petroleum gas and hydrogen have cleaner combustion, they are used to fuel much less efficient petrol engines and are not as widely available.
Biodiesel can be used in any diesel engine when mixed with mineral diesel. The majority of vehicle manufacturers limit their recommendations to 15% biodiesel blended with mineral diesel. In some countries manufacturers cover their diesel engines under warranty for B100 use, although Volkswagen of Germany, for example, asks drivers to check by telephone with the VW environmental services department before switching to B100. B100 may become more viscous at lower temperatures, depending on the feedstock used, requiring vehicles to have fuel line heaters. In most cases, biodiesel is compatible with diesel engines from 1994 onwards, which use 'Viton' (by DuPont) synthetic rubber in their mechanical injection systems. Electronically controlled 'common rail' and 'pump duse' type systems from the late 1990s onwards may only use biodiesel blended with conventional diesel fuel. These engines have finely metered and atomized multi-stage injection systems are very sensitive to the viscosity of the fuel. Many current generation diesel engines are made so that they can run on B100 without altering the engine itself, although this depends on the fuel rail design. NExBTL is suitable for all diesel engines in the world since it overperforms DIN EN 590 standards.
Since biodiesel is an effective solvent and cleans residues deposited by mineral diesel, engine filters may need to be replaced more often, as the biofuel dissolves old deposits in the fuel tank and pipes. It also effectively cleans the engine combustion chamber of carbon deposits, helping to maintain efficiency. In many European countries, a 5% biodiesel blend is widely used and is available at thousands of gas stations.[13][14] Biodiesel is also an oxygenated fuel, meaning that it contains a reduced amount of carbon and higher hydrogen and oxygen content than fossil diesel. This improves the combustion of fossil diesel and reduces the particulate emissions from un-burnt carbon. Biodiesel is safe to handle and transport because it is as biodegradable as sugar, 10 times less toxic than table salt, and has a high flashpoint of about 300 F (148 C) compared to petroleum diesel fuel, which has a flash point of 125 F (52 C).[15].
In the USA, more than 80% of commercial trucks and city buses run on diesel. The emerging US biodiesel market is estimated to have grown 200% from 2004 to 2005. "By the end of 2006 biodiesel production was estimated to increase fourfold [from 2004] to more than 1 billion gallons".[16] [edit] Vegetable oil


Edible vegetable oil is generally not used as fuel, but lower quality oil can be used for this purpose. Used vegetable oil is increasingly being processed into biodiesel, or (more rarely) cleaned of water and particulates and used as a fuel. To ensure that the fuel injectors atomize the fuel in the correct pattern for efficient combustion, vegetable oil fuel must be heated to reduce its viscosity to that of diesel, either by electric coils or heat exchangers. This is easier in warm or temperate climates. Big corporations like MAN B&W Diesel, Wartsila and Deutz AG as well as a number of smaller companies such as Elsbett offer engines that are compatible with straight vegetable oil, without the need for after-market modifications. Vegetable oil can also be used in many older diesel engines that do not use common rail or unit injection electronic diesel injection systems. Due to the design of the combustion chambers in indirect injection engines, these are the best engines for use with vegetable oil. This system allows the relatively larger oil molecules more time to burn. Some older engines, especially Mercedes are driven experimentally by enthusiasts without any conversion, a handful of drivers have experienced limited success with earlier pre-"pumped use" VW TDI engines and other similar engines with direct injection. Several companies like Elsbett or Wolf have developed professional conversion kits and successfully installed hundreds of them over the last decades. Oils and fats can be hydrogenated to give a diesel substitute. The resulting product is a straight chain hydrocarbon, high in cetane, low in aromatics and sulphur and does not contain oxygen. Hydrogenated oils can be blended with diesel in all proportions Hydrogenated oils have several advantages over biodiesel, including good performance at low temperatures, no storage stability problems and no susceptibility to microbial attack.[17]