Thread started: Mar 9 2011, 1:25 AM EST
Watch
I have some free time over break to continue working on my welding guide, I noticed during cleanup that this guide got bundled with the information that I was typing, there's quite a bit of mis-information here, would it be ok just to delete this portion of it? I only ask because I didn't write it.
out of
found this valuable.
Do you find this valuable?
Show Last Reply
|
Last Reply:
RE: Can we get rid of this page?
By: brandon_a_boyer,
Mar 10 2011, 2:11 AM EST
18. It's shielding gas, not flux
19. Shielding gas Comes in a wide range of compositions, from 100% Argon, to exotic tri-mixes.
20. There are two settings on most GMAW welders, wire feed speed, and voltage.
21. Shield Gas has nothing to do with the wire penetrating the metal. and there are a range of settings depending on material and position.
22. The foot pedal controls the amperage output, it's not a simple on/off
23. Filler rod isn't necessarily stainless steel.
24. the 6 and the 7 have nothing to do with the current settings for SMAW
25. Quenching has no "crystallizing" effect on steels with .3% or less carbon content and will not cause the weld to fail.
out of
found this valuable.
Do you find this valuable?
|
