Location: null

Discussion: My first possible "build"

Category: Discussion Forum / General Discussion

Report thread
Watch thread
Share this

1 2 | Next

randomknife666	My first possible "build" Jul 4 2011, 3:11 AM EDT \| Post edited: Jul 4 2011, 3:14 AM EDT Yes, to those who guessed, I am talking about a gun, a Norinco M305 to be precise, and no, you will not convince me to change that choice. Now, I'm not so much building it from the ground up as much as I am customizing it to suit me. I have decided that I will most likely be looking into putting rails on the bottom, and sides, to support a light and foregrip. I will likely keep just the stock sights, however, I am open to suggestions. This rifle is being built as it is for 3 reasons, 1- Most importantly to me, hunting. 2- Almost as important as hunting, home defence. 3- Fun, and keep in mind, I don't mind paying for the extra cost of the .308 round. The primary purpose on creating this thread was to see folks oppinions on my decision, and if they have any suggestions. Edit- Almost forgot, here is a link to the rifle. http://www.wolverinesupplies.com/default.asp?Pg=8&do=3&mcid=1&scid=12&pid=1754 Post reply Do you find this valuable? Keyword tags: build Canada defence guns hunting M14 Norinco M305 rifle
LastPariah	1. RE: My first possible "build" Jul 4 2011, 4:42 AM EDT \| Post edited: Jul 4 2011, 4:42 AM EDT How much is it? It looks almost exactly like an m14. My only suggestion that if the gun and all its mods cost over $1500, you should look into a Springfield M1a Socom 2 Post reply Do you find this valuable?
Gunnersrus	2. RE: My first possible "build" Jul 4 2011, 5:25 AM EDT \| Post edited: Jul 4 2011, 5:25 AM EDT "How much is it? It looks almost exactly like an m14. My only suggestion that if the gun and all its mods cost over $1500, you should look into a Springfield M1a Socom 2 " I am a explosives maker and I make heavy weapons anti-tanks full auto cross bows rockets Post reply 0 out of 4 found this valuable. Do you find this valuable? Do you?
Ke6n	3. RE: My first possible "build" Jul 4 2011, 6:39 AM EDT \| Post edited: Jul 4 2011, 6:39 AM EDT "I am a explosives maker and I make heavy weapons anti-tanks full auto cross bows rockets" Can someone seriously ban this guy or give him a stern talking to? This is not his first offence. Post reply Do you find this valuable?
Ke6n	4. RE: My first possible "build" Jul 4 2011, 6:43 AM EDT \| Post edited: Jul 4 2011, 6:43 AM EDT "How much is it? It looks almost exactly like an m14. My only suggestion that if the gun and all its mods cost over $1500, you should look into a Springfield M1a Socom 2 " In the link he provided it states the price of the firearm at $459.95 I wish us Australians could have our semi-autos back. I really do envy you Americans. Post reply Do you find this valuable?
timberrattler	5. RE: My first possible "build" Jul 4 2011, 8:04 AM EDT \| Post edited: Jul 4 2011, 8:04 AM EDT "Can someone seriously ban this guy or give him a stern talking to? This is not his first offence." He's had a stern talking to from SJ. He will be taken care of. Now back to RK's kick ass build. Post reply Do you find this valuable?
Sharpie41	6. RE: My first possible "build" Jul 4 2011, 9:29 AM EDT \| Post edited: Jul 4 2011, 9:29 AM EDT "In the link he provided it states the price of the firearm at $459.95 I wish us Australians could have our semi-autos back. I really do envy you Americans." Me and RK are Canadians, I feel sorry for you Aussies. RK, I can't copy the link but is this one the synthetic stock? If not I would suggest one, as for the grip, which are you getting? Do you want a short foregrip for compactness or long for more control? I have no idea where I'd find one but I want one of those Magpul angled grips mounted well foreword, I like having a long grip on a rifle for longer range shooting Just an FYI, I'm going to be starting my SKS build sooner than expected, switching around the plan, hopefully get a glock by xmas Post reply Do you find this valuable?
Sharpie41	7. RE: My first possible "build" Jul 4 2011, 9:52 AM EDT \| Post edited: Jul 4 2011, 9:52 AM EDT "I am a explosives maker and I make heavy weapons anti-tanks full auto cross bows rockets" Yes thank you, now shut up and let the people who actually know about guns talk... Post reply Do you find this valuable?
randomknife666	8. RE: My first possible "build" Jul 4 2011, 12:52 PM EDT "Me and RK are Canadians, I feel sorry for you Aussies. RK, I can't copy the link but is this one the synthetic stock? If not I would suggest one, as for the grip, which are you getting? Do you want a short foregrip for compactness or long for more control? I have no idea where I'd find one but I want one of those Magpul angled grips mounted well foreword, I like having a long grip on a rifle for longer range shooting Just an FYI, I'm going to be starting my SKS build sooner than expected, switching around the plan, hopefully get a glock by xmas" Yeah, its the synthetic stock. I want to get the longer grip, for control, I'm looking at this one to be honest http://www.wolverinesupplies.com/default.asp?Pg=8&do=3&mcid=13&scid=32&pid=1450 @Ke6n- As sharpie said, we are Canadians, and this is one gun that even the Americans can't buy (new atleast, since there is essentially a norinco import ban.). Don't matter much though because they've probably got better replacements. Post reply Do you find this valuable?
randomknife666	9. RE: My first possible "build" Jul 4 2011, 12:55 PM EDT \| Post edited: Jul 4 2011, 12:57 PM EDT "How much is it? It looks almost exactly like an m14. My only suggestion that if the gun and all its mods cost over $1500, you should look into a Springfield M1a Socom 2 " I'm not going to look into a springfield, purely because I'm building this over a length of time. The rifle is only $459.95, and I would be buying that as soon as I get the money (estimated time of 2 months to aquire the money for it). I'll be ordering each individual part when I can afford them. Also, unless I buy the most expensive accessories I can find, and ones I have no use for, I doubt the price will be over $1500. Post reply Do you find this valuable?
Sharpie41	10. RE: My first possible "build" Jul 4 2011, 1:34 PM EDT \| Post edited: Jul 4 2011, 2:17 PM EDT "Yeah, its the synthetic stock. I want to get the longer grip, for control, I'm looking at this one to be honest http://www.wolverinesupplies.com/default.asp?Pg=8&do=3&mcid=13&scid=32&pid=1450 @Ke6n- As sharpie said, we are Canadians, and this is one gun that even the Americans can't buy (new atleast, since there is essentially a norinco import ban.). Don't matter much though because they've probably got better replacements." Ahh, okay, chances are I will get the longer grip for my sks too, but I was thinking about getting that one but shorter (the stubby) Can't wait to start it Post reply Do you find this valuable?
Sharpie41	11. RE: My first possible "build" Jul 4 2011, 8:01 PM EDT \| Post edited: Jul 4 2011, 8:01 PM EDT "I'm not going to look into a springfield, purely because I'm building this over a length of time. The rifle is only $459.95, and I would be buying that as soon as I get the money (estimated time of 2 months to aquire the money for it). I'll be ordering each individual part when I can afford them. Also, unless I buy the most expensive accessories I can find, and ones I have no use for, I doubt the price will be over $1500." But the price is only for a limited time, you may need to save up a little longer, not much longer but still... How many new parts are you getting? Just the few rails and grip? You getting a scope? Another FYI about my build, I'll be getting an SKS very soon, and I'll be getting a new stock for it (standard one is too short) dads got a small red dot sight, I'll get some sort of sling for it, look into new sights for it, also look into the SKS-D mag well. Any other suggestions? Post reply Do you find this valuable?
randomknife666	12. RE: My first possible "build" Jul 4 2011, 8:56 PM EDT \| Post edited: Jul 4 2011, 8:56 PM EDT " How many new parts are you getting? Just the few rails and grip? You getting a scope?" I may put a scope on it, but only if I find a scope mount which allows me to use the iron sights as well. So far, only accessories I'll be getting are 3 rails, a light, and a grip. Was trying to reply earlier, but the power went down. Post reply Do you find this valuable?
Sharpie41	13. RE: My first possible "build" Jul 4 2011, 9:05 PM EDT \| Post edited: Jul 4 2011, 9:05 PM EDT "I may put a scope on it, but only if I find a scope mount which allows me to use the iron sights as well. So far, only accessories I'll be getting are 3 rails, a light, and a grip. Was trying to reply earlier, but the power went down." I think marstar has a see through rail Post reply Do you find this valuable?
randomknife666	14. RE: My first possible "build" Jul 4 2011, 9:12 PM EDT \| Post edited: Jul 4 2011, 9:12 PM EDT "I think marstar has a see through rail" They are sold out, but thanks for pointing me there, I'll keep them in mind. Post reply Do you find this valuable?
Sharpie41	15. RE: My first possible "build" Jul 4 2011, 9:19 PM EDT \| Post edited: Jul 4 2011, 9:19 PM EDT "They are sold out, but thanks for pointing me there, I'll keep them in mind." Check wolverine supplies? I'm sure you've done that though. I can check the shooting edge here in Calgary if you want? Post reply Do you find this valuable?
randomknife666	16. RE: My first possible "build" Jul 4 2011, 9:36 PM EDT \| Post edited: Jul 4 2011, 9:36 PM EDT "Check wolverine supplies? I'm sure you've done that though. I can check the shooting edge here in Calgary if you want?" Sure, but that means waiting till the roadtrip out there, oh well, not like I care much for scopes. Post reply Do you find this valuable?
Sharpie41	17. RE: My first possible "build" Jul 4 2011, 9:46 PM EDT \| Post edited: Jul 4 2011, 9:46 PM EDT "Sure, but that means waiting till the roadtrip out there, oh well, not like I care much for scopes." There's this thing called fed ex or DHL, they are great for getting things to other places :-P I'll check and you contact them and they'll send it out, I think Post reply Do you find this valuable?
randomknife666	18. RE: My first possible "build" Jul 4 2011, 9:59 PM EDT \| Post edited: Jul 4 2011, 9:59 PM EDT "There's this thing called fed ex or DHL, they are great for getting things to other places :-P I'll check and you contact them and they'll send it out, I think" pfft wheres the fun in that? lol Post reply Do you find this valuable?
Sharpie41	19. RE: My first possible "build" Jul 4 2011, 10:13 PM EDT "pfft wheres the fun in that? lol" Haha, or you could come out for stampede....thats fun Post reply Do you find this valuable?

1 2 | Next

A realistic solution to a "Zombie Gun".	Martial Arts	Top 10 Rifles for the Apocalypse
What would be the official-issue weapons of ZSDW?	The story of a man and his wheelgun. (Please read.)	zombie loadout
weight misconecptions.	Battle Music???????	Making guns and bullets post z day
in the UK?	Range Report	Muzzle loading rifles

Location: null

Discussion: My first possible "build"

Related Content